Custom-Made, Never Off-the-Shelf

There is no standard stamping catalogue here. Production runs through our partner stamping workshop in Liushi — 5 stamping presses and automatic machines — tooled for your part, so the sample you approve is made on the same setup as mass production. Coordinated manufacturing, not a catalogue: I place your job with the right partner factory and follow it through.

Standard material is T2 copper, purity ≥ 99.9%; brass is available where the drawing calls for it. Tolerances, thickness and tin / silver plating thickness in microns (µm) are stated in the quotation and confirmed before production — nothing left vague.

Tooling is part of the offer, not an afterthought. The die for your part is designed and built here and quoted openly and separately. If you run your own press, standalone stamping dies and moulds can also be designed, built and exported on their own — order the tooling only, and stamp the parts in your own workshop.

Who buys this

Panel builders needing ACB & MCCB brackets, fixing plates and connection plates no catalogue carries
Workshops re-making in-service stamped parts from a worn sample — no drawing needed
Press owners ordering standalone dies & moulds for export
Buyers who want the die run here first, then shipped together with a production order

Specification & Quotation

Specification — and What to Send for a Quotation

Only the claims we make anywhere on this site: material, finish and tolerances are confirmed in writing in your quotation, before production.

Production basis	Your drawing (PDF / DWG / STEP) or physical sample — made to drawing only
Materials	T2 copper (≥ 99.9% Cu), brass — grade confirmed per order
Thickness range	Commonly 0.5–6 mm sheet & strip for switchgear parts — confirm your thickness at quotation
Processes	Blanking, punching, bending, forming, progressive-die stamping, tapping
Surface finish	Natural, tin plated, silver plated — thickness in µm confirmed at quotation
Tooling	Die made to your drawing; tooling cost quoted separately and openly. Standalone dies & moulds can also be designed, built and exported on their own — see Product Discovery on the homepage
Typical parts	Connection pieces, clips, brackets, busbar connection parts, feeder-pillar fuse strips, OEM metal parts for switchgear

What to send for a quotation

Drawing file (PDF / DWG / STEP) — or clear photos + dimensions, or the sample by courier
Material & thickness of each piece
Plating — natural / tin / silver, and µm if your standard fixes it
Quantity & destination port

Send Your Drawing →

From Drawing to Shipment — How Your Order Runs

STEP 1

Drawing

Your drawing, sample or list received — material, finish and details confirmed in writing before anything is made.

STEP 2

Sample & Quotation

Price and lead time quoted openly; a sample is made first wherever tooling is involved, and production follows your approved sample.

STEP 3

Inspection

Production followed in Liushi; finished goods checked against the drawing, with photos & video shared with you before shipment.

STEP 4

Shipment

Export packing, then consolidation into one container to your port — together with your other lines from this site.

Gallery

Gallery — Custom Stamping Parts

Real production photo — finished brass stampings collected in a bucket straight off the press at the partner stamping workshop in Liushi — REAL PRODUCTION — BRASS STAMPINGS COMING OFF THE PRESS

Real photo — stacks of brass strip coils (H62) in a Liushi warehouse, raw material stock for stamped parts — REAL PHOTO — BRASS STRIP COILS (H62), RAW MATERIAL STOCK

Progressive die stamping a custom copper part, with the technical drawing and digital caliper on the bench — AI-GENERATED CREATIVE IMAGE — PART AT THE DIE, DRAWING AND CALIPER BESIDE IT

Send Your Drawing — Get a Stamping Quotation

Send the drawing, sample photos or list on WhatsApp — attach the files in the chat. The quotation comes back with material, finish, tooling cost if any, and lead time.

Send Your Drawing →

Keep Exploring